Investigate
Failure Analysis & Defect Investigation
Root-cause investigation of cracking, corrosion, wear and fatigue, so failures do not repeat.
Read more →Engineering Consultancy · Mudgee NSW
Defensible decisions on damaged and ageing plant.
Failure investigation, repair engineering and welding procedures for steel structures and fixed plant. Send photos of a defect for a first view, or start with the WPS Tool.
- Boilermaker, then years supervising welding & fabrication
- Engineers Australia · Engineering Associate
- Independent review & certification through registered engineering partners
Where To Start
Start with the job in front of you.
01
A welding procedure
WPS and PQR documentation, weld maps, weld repair procedures and NDT selection to AS/NZS 1554.1.
Welding procedures →02
Write your own WPS
Australian WPS software: a WPS in three steps to AS/NZS 1554.1, 1554.4, 1554.5 or AS 3992, plus repair procedures drafted from NDT reports.
The WPS Tool →03
Every service
Seven engineering services for industrial plant and steel structures, from failure analysis and repair design to reliability and shutdowns.
Services →04
3D scanning & inspection
3D scanning, thermography and digital condition records that turn site condition into data.
3D scanning →16YRS+
Trade & engineering experience
7
Specialist service streams
AS/NZS
Standards-aligned
NSW
Site visits · remote Australia-wide
Specialist Engineering Services
Built for asset performance.
From failure investigation and repair engineering to welding procedures and reliability strategy. Practical work that reduces downtime and extends asset life.
Design
Repair Engineering & Design Documentation
Engineered repairs, strengthening and modifications for steel structures and fixed plant.
Read more →Reliability
Asset Management & Reliability Engineering
Criticality, FMECA and RCM strategies that put maintenance effort where failure hurts most.
Read more →Shutdown
Maintenance Project & Shutdown Support
Scopes, work packs and procedures ready before the window, with engineering support during it by arrangement.
Read more →Digital
Digital Inspection & Asset Intelligence
3D scanning, thermography and digital condition records that turn site condition into data.
Read more →Compliance
Quality, Compliance & Technical Documentation
ITPs, coverage matrices and verification dossiers that stand up to audit.
Read more →Welding
Welding & Fabrication Advisory
WPS and PQR documentation, weld maps, weld repair procedures and NDT selection to AS/NZS 1554.1.
Read more →Industries
Industries we work with
Mining and quarrying, fabrication workshops, councils, energy, manufacturing and transport.
See industries →Start Here
Not sure which service?
Describe the asset and the problem. We will point you to the right starting point.
Send an enquiry →Why People Call
Something cracked, failed twice, or needs a procedure.
Most jobs start with one of these. Each one has a clear first step.
01
NDT has found a crack
An indication on a boom, chassis, chute or structure, and you need a repair pathway you can document.
Repair pathway →02
The same failure, again
A component has failed twice. Repairing it a third time the same way will not fix the cause.
Failure analysis →03
The OEM says replace
The budget or the lead time says repair. You need the engineering to make that call and defend it.
Repair engineering →04
A client wants your WPSs
A principal or tender asks for welding procedures, weld maps or an ITP you do not have yet.
Welding procedures →05
A shutdown is being scoped
Scopes, work packs and repair procedures ready before the window opens, with engineering support during it by arrangement.
Shutdown support →06
An auditor or insurer is asking
They want the records behind a repair, a maintenance strategy or a decision, and they want them organised.
Quality documentation →New · Software
The Veristruct WPS Tool: a WPS in three steps, and a drafted repair procedure for each rejected indication in your NDT report.
Built on procedure templates for AS/NZS 1554.1, AS/NZS 1554.4, AS/NZS 1554.5 and AS 3992. Certifies nothing and exports repair work straight to your CMMS. Perpetual licence with annual maintenance.
802 procedure templates
Four standards
PDF & Word output
NDT report → repair procedures
SAP · CSV · JSON export
See the WPS Tool →
Pricing on request, by quote.
Work You Can Defend
Engineered and documented to the standards your auditors already use.
We don't ask you to take our word for it. Every deliverable is traceable, standards-referenced and built to withstand review. Veristruct prepares the full technical package and coordinates independent review and certification through registered engineering partners.
AS 4100 — Steel Structures
AS/NZS 1554.1 — Welding
AS IEC 60812 — FMECA
ISO 55000 / 55001 — Asset Mgmt
AS/NZS ISO 31000 — Risk
Engineers Australia · Engineering Associate.
Credentials, method statements & insurance — available on request.
ABN 92 699 702 139
How We Work
Simple. Practical. Reliable.
01 — ASSESS
Assess
We review your asset, its condition data and the engineering challenge in front of you. Photos, NDT reports and drawings are enough to start.
02 — ENGINEER
Engineer
We develop practical, standards-aligned solutions tailored to your plant and constraints, quoted as a fixed-scope package.
03 — DELIVER
Deliver
You receive clear documentation and technical support you can act on with confidence.
Where We Work
Based in Mudgee. Working across Australia.
Site visits across regional NSW, including the Central West, Orana and the Hunter Valley, with travel quoted as its own line. Everything that does not need a site visit is delivered remotely, anywhere in Australia.
Mudgee
Gulgong & Rylstone
Dubbo
Orange
Bathurst
Lithgow
Hunter Valley
Newcastle
Australia-wide, remote
Service areas →
Not every task needs certification. Where yours does, it is identified when the job is scoped.
Insights
Straight answers to common engineering questions.
Short technical articles for maintenance teams, fabricators and asset owners.
Welding
Prequalified WPS or qualified by testing? What AS/NZS 1554.1 asks of a fabricator
The three documents a principal means by "your welding procedures", the qualification routes, and how to choose between them.
Weld repair
NDT found a defect. What happens next?
From the NDT report to a documented weld repair: indications versus defects, choosing the pathway, and what a repair procedure contains.
Ageing plant
Repair or replace? A defensible way to decide on ageing plant
Criticality, condition, cause, buildability, lead time and whole-of-life cost: making the call on evidence.
Let's Talk Engineering
Protect your critical assets.
Get defensible engineering support for integrity, reliability and repair, tailored to your assets and your standards. We usually reply within one business day.